Yamaha MG06X

6-Channel Mixing Console
Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereo)
1 Stereo Bus
“D-PRE” mic preamps with an inverted Darlington circuit
High-grade effects: SPX with 6 programs
XLR balanced outputs
PAD switch on mono inputs
+48V phantom power
Metal chassis
Dimensions(W×H×D): 149 mm x 62 mm x 202 mm (5.9″x 2.4″x 7.9″)
Net Weight: 0.9 kg (1.98 lbs.)

Outline
Mixing capability    On-board processors    SPX algorithm: 6 programs
I/O    Phantom power    +48 V
Input Channels    Mono[MIC/LINE]    2
Stereo[LINE]    2
Output Channels    STEREO OUT    2
PHONES    1
Bus    Stereo: 1
Input Channel Function    PAD    26 dB (Mono)
HPF    80 Hz, 12 dB/oct (Mono)
EQ HIGH    (Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ LOW    (Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED    LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter    2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB]
General specifications
Total harmonic distortion    0.01 % @ +8dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +18dBu (1kHz), GAIN knob: Min
Frequency response    +0.5 dB/-0.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level    Equivalent input noise    -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Residual output noise    -102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
Crosstalk    -88 dB
Power requirements    PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz or equivalent recommended by Yamaha
Power consumption    12 W
Dimensions    W    149 mm (5.9″)
H    62 mm (2.4″)
D    202 mm (7.9″)
Net weight    0.9 kg (1.98 lbs.)
Accessories    Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A
Others    Operating Temperature: 0 to +40˚C