Ik Multimedia Z-Tone Buffer Boost
Ik Multimedia Z-Tone Buffer Boost

Ik Multimedia Z-Tone Buffer Boost

199,00

Ultra low noise, high bandwidth and ultra low distortion preamp, buffer and direct box, with boost control and variable gain and input impedance.

1 disponibili

Descrizione

Key Features

    Active/Passive pickup selector
    PURE channel for transparent sound
    JFET channel adds warmth & harmonics
    Z-TONE variable impedance control creates
    a wide range of tones
    Buffers signal for longer pedalboards & cable runs

    Boost circuit adds volume & drive
    Alternate outs for mixers & PAs
    Ground lift switch eliminates buzz & hum
    Designed and made in Italy

Specs

Z-TONE Buffer Boost Specifications
Topology

Ultra low noise, high bandwidth and ultra low distortion preamp, buffer and direct box, with boost control and variable gain and input impedance. Transformer-based galvanically isolated balanced output and electronically buffered low impedance unbalanced output. PURE and JFET input stages for total transparency or added harmonics.
Audio specs

    I/O Gain: Unitary, from 1/4” input JACK to both 1/4” and XLR outputs when GAIN is at 0dB and Z-TONE at the SHARP position.
    Gain Range: From -8dB to +8dB
    Boost range: From 0dB to +10dB
    Input impedance – Z-TONE set on PASSIVE mode: Variable from 1MΩ down to 2.2kΩ
    Input impedance – Z-TONE set on ACTIVE mode: Approx 20kΩ
    Output impedance, unbalanced out: 56Ω
    Output impedance, balanced out: 600Ω
    Max input level before clipping: +13dBm when powered by 48V phantom,+9dBm when powered by 9V battery
    Dynamic Range: better than 114dB(A) for both outputs, input gain at 0dB
    Total Harmonic Distortion, balanced output, 1kHz, +4dBm input: 0.0033% (PURE), 0.2% (JFET)
    Total Harmonic Distortion, unbalanced output, 1kHz, +4dBm input: 0.00055% (PURE), 0.2% (JFET)
    Frequency response: from 5Hz to 30kHz -1dB
    Phase deviation: 0° +/-10° from 20Hz to 20kHz

Power

    Phantom power: +48V phantom on Balanced output.
    Battery power: 9V
    External DC power: 9VDC, positive outside – not included
    Current consumption from P48 phantom power source: 6.5mA

Dimensions

    Size: 10.8cm/4.25″ x 12cm/4.72″ x 5.8cm/2.28″
    Weight: 600g/21.2oz

Package includes

    Z-TONE Buffer Boost unit

Informazioni aggiuntive

Peso 2 kg

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “Ik Multimedia Z-Tone Buffer Boost”

Il tuo indirizzo email non sarà pubblicato.